It seems that you're using an outdated browser. Some things may not work as they should (or don't work at all).
We suggest you upgrade newer and better browser like: Chrome, Firefox, Internet Explorer or Opera

×
I thought you meant resetting system settings. Random restarts? I have it too. Most often during playing flash and sometimes in games. From what I've read, it shouldn't indicate any big problem. But did you notice it after replugging your PSU?
I had the same problem with the PSU. First it started with an occasional hard reset, but then the resets became more and more frequent. It turned out that the electrical conductors (voltage rails) were failing due to age – my computer was five years old at the time. Good PSUs aren't too expensive; they'll last long and spare you the frustration.
avatar
SpooferJahk: This guy is having some computer issues again, but this time it involves something that I have never encountered before and can't think of any solution at the top of my head. Recently I have had the issue of my computer resetting itself without warning and it seems to only happen when I am watching things on YouTube for a decent amount of time. I have yet to see it reset when doing anything else.

Can Flash actually do something like this by any chance? So far it seems like my machine is working fine outside of YouTube. If it is hardware related I can only pinpoint it to be PSU related but even then, it would be doing this more often than just on YouTube.
Which browser do you use? If Internet Explorer, you might give Google Chrome a try. Chrome uses its own implementation of Flash (called 'Pepper' I think), not the regular plugin.
This will only help of course if the problem is Flash related (since you mentioned the PC also rebooting when playing a game)..
Have you tried looking at Speccy? They have a free Windows version that can diagnose the computer and it shows the temperature of all the hardware. If the computer is crashing only for YouTube videos, that could be the video card or PSU overheating.
check the externals too, make sure all your cords are intact and fully inserted into the outlets, check the outlet itself and any switches that maybe connected. also, my cats have been known to flip the breakers on my power strips, I've even done it time to time with my own feet.

point is, don't forget to think outside 'the box'


edit: my macbook likes to do the same thing but, I always just thought it was macbook being macbook especially since none of my PCs ever have simply shut down on their own accord
Post edited August 17, 2014 by evilnancyreagan
avatar
SpooferJahk: This guy is having some computer issues again, but this time it involves something that I have never encountered before and can't think of any solution at the top of my head. Recently I have had the issue of my computer resetting itself without warning and it seems to only happen when I am watching things on YouTube for a decent amount of time. I have yet to see it reset when doing anything else.

Can Flash actually do something like this by any chance? So far it seems like my machine is working fine outside of YouTube. If it is hardware related I can only pinpoint it to be PSU related but even then, it would be doing this more often than just on YouTube.
avatar
skimmie: Which browser do you use? If Internet Explorer, you might give Google Chrome a try. Chrome uses its own implementation of Flash (called 'Pepper' I think), not the regular plugin.
This will only help of course if the problem is Flash related (since you mentioned the PC also rebooting when playing a game)..
I was using Pale Moon but during this whole ordeal I switched to Chrome to take full advantage of YouTube's HTML5 player. Kind of like to have a player that actually buffers all the way with the option for 1080p. Yeah, Google Chrome is the devil to some but I am not afraid of it.
Sometimes this sort of behavior - instant flicky restarts, more or less at random, sometimes in close succession and sometimes at longer intervals - can also be caused by outdated video drivers. See if you can update the drivers for your chipset as well as for your card. I mostly run across it in machines that don't have video cards, but it can be devilishly hard to troubleshoot, since the system doesn't write errors when this happens.
Had the same thing last year. PSU.
avatar
LinustheBold: Sometimes this sort of behavior - instant flicky restarts, more or less at random, sometimes in close succession and sometimes at longer intervals - can also be caused by outdated video drivers. See if you can update the drivers for your chipset as well as for your card. I mostly run across it in machines that don't have video cards, but it can be devilishly hard to troubleshoot, since the system doesn't write errors when this happens.
My NVIDIA drivers are up to date.
avatar
realkman666: Had the same thing last year. PSU.
So did I a few years back, except in my case it wasn't the PSU, it was the caps on the motherboard. That would be highly unlikely in the OP's case though, since he stated his mobo was from April...
Flash by itself being a program shouldn't be able to do that.

However that doesn't mean it's impossible. There's some notes about overheating, but i wonder if Flash is given admin access or incorporates itself into the OS to give better performance? Anything with the highest level access can crash the system in horrible ways as it would have direct memory access and control access to any part of the system.

As i remember, the CPU has 4 levels of controls. Level 0 being kernel level, and level 3 being for programs. Well i know the Linux kernel only uses 2 levels, and so does windows. So level 0 is given full unchecked access to anything and everything. This includes device drivers and anything else that's loaded up into the kernel.

Level 1 items is everything else: Usermode Land. Anything that crashes in usermode land should be in protected mode, and thereby if something crashes it should not kill the computer.

But i've had 16bit dos programs crash the entire system before, so i wouldn't say the implementation of windows is perfect.
avatar
Punished_Snake: Try to install some CPU heat control, so you can check if your PC overheat during some processes.
If the OP immediately goes into the firmware and looks at the temperature of the processor that ought to give a really good indication about what the temperature was a few seconds earlier.
avatar
rtcvb32: Flash by itself being a program shouldn't be able to do that.

However that doesn't mean it's impossible. There's some notes about overheating, but i wonder if Flash is given admin access or incorporates itself into the OS to give better performance? Anything with the highest level access can crash the system in horrible ways as it would have direct memory access and control access to any part of the system.

As i remember, the CPU has 4 levels of controls. Level 0 being kernel level, and level 3 being for programs. Well i know the Linux kernel only uses 2 levels, and so does windows. So level 0 is given full unchecked access to anything and everything. This includes device drivers and anything else that's loaded up into the kernel.

Level 1 items is everything else: Usermode Land. Anything that crashes in usermode land should be in protected mode, and thereby if something crashes it should not kill the computer.

But i've had 16bit dos programs crash the entire system before, so i wouldn't say the implementation of windows is perfect.
It definitely has 4 levels, my motherboard even has 4 LEDs to indicate which power level my processor is running in.
Post edited August 17, 2014 by hedwards
avatar
hedwards: It definitely has 4 levels, my motherboard even has 4 LEDs to indicate which power level my processor is running in.
i doubt the led's would give any useful feedback information as you can switch to kernel mode and user mode millions of times in a given second as say a read operation or accessing data from a hard drive..

I remember reading the specs for the intel chip. There's a few super registers that determine the mode and setting of the CPU in general. The mode is a 2bit entry in the 4-6 64bit registers. This gives you exactly 4 access levels.

It was originally intended for the 4 levels that the top level would be: (off the top of my head but i think this is right)

0) kernel
1) device drivers
2) services (software)
3) user programs

But this just got squished to:

0) kernel & drivers
1) Everything else
2) unused
3) unused

Curiously when Oracle (Sun Microsystems) noticed this they sped up their emulators for VirtualBox by like 1000 times since they could make use of level 2 or 2 & 3, and when those levels are triggered special instructions would forward that information to the upper levels appropriately for like video display and other actions...

But this is mostly historical. If flash software is unstable, don't use it. Yeah you can't watch YouTube, big deal... download the files and watch them locally like i do :P (You'll also avoid the horrible caching and drops of service that way too)
Post edited August 17, 2014 by rtcvb32
avatar
hedwards: It definitely has 4 levels, my motherboard even has 4 LEDs to indicate which power level my processor is running in.
avatar
rtcvb32: i doubt the led's would give any useful feedback information as you can switch to kernel mode and user mode millions of times in a given second as say a read operation or accessing data from a hard drive..
It's there for debugging when your computer won't boot. Sort of like in olden times when you had those beep codes. I don't think I've ever seen anything other than all four of the lights on, except briefly during power down.

Anyways, in order to view the LEDs you have to be able to see into the case and that often means having the case open.
avatar
hedwards: It's there for debugging when your computer won't boot. Sort of like in olden times when you had those beep codes. I don't think I've ever seen anything other than all four of the lights on, except briefly during power down.

Anyways, in order to view the LEDs you have to be able to see into the case and that often means having the case open.
So basically when you're making upgrades and you power on to see if it works before putting the cover on...

The 4 LED's aren't for the CPU. Probably the state of the POST (<i>Power On Self Test</i>), and if they are blinking the order of on/off would give you 16 combinations for what's generally wrong. If it was directly connected to the CPU then if the CPU failed to have power they would never come up or wouldn't be of use until the CPU worked and lots of other details. The CPU won't actually do anything until the BIOS is initialized and passed ROM instructions which is nearly the last step of POST.

I don't recall all the stages of POST, but it checks the CPU, Video out device, Memory, and maybe basic connectivity between all PCI/connections to see if they all return that they are up and running. Memory might run through a quick check of read/writes every meg or so, or do a quick xor read and write of like 4 values in bulk per meg before updating it's counter and printing it out, but that's mostly BIOS programming and can get skipped.