It seems that you're using an outdated browser. Some things may not work as they should (or don't work at all).
We suggest you upgrade newer and better browser like: Chrome, Firefox, Internet Explorer or Opera

×
avatar
pds41: How do I know if my PSU is compatible with a bottom mount? I'm using a CX750M, so assume it would be (as it's not a generic PSU), but is there a way to be sure?
avatar
Phc7006: Most PSUs are ( and the CX750M is - I have a bottom mounted CX600M in my desktop) compatible. You even have the choice to either mount your PSU with its air intake facing the floor ( as the case has ventilated space under the PSU mount ) or inside the case. The former would allow the PSU to have fresher air but should be avoided if you have carpet on the floor . And if you haven't, don't forget to clean the dust filter from time to time. The second option will mean that the PSU will breath slightly hotter air ( that may reduce slightly its efficiency, but it's not that significant ) but will also suck some more hot air out of the case. The choice is yours

PSUs that shouldn't be bottom mounted do not have a large fan on one of their faces ( but an array of holes). Meaning that their heat will go up in the case
Found an old Antec P180 case, which I rebuilt the system in. Got a replacement chip under warranty, and then bought an Arctic Cooler A30. The chip now runs brilliantly, barely hits 40 degrees under load and it's so quiet!

Thanks for all your help on this one everybody!
Post edited October 26, 2013 by pds41
avatar
pds41: Found an old Antec P180 case, which I rebuilt the system in. Got a replacement chip under warranty, and then bought an Arctic Cooler A30. The chip now runs brilliantly, barely hits 40 degrees under load and it's so quiet!

Thanks for all your help on this one everybody!
Glad to read you got it right !